[Options]
ALTCRF=n		n = 0-50 - CRF value to use for Alternate Movie-Only encodes (default=20)
ALTERNATE_PAL=n		n = 0/1 - Default=0, setting to "1" converts FILM DVD's to PAL without adding frames
ASSUME_HYBRID=n		n = 0/1 - Default=0, - if set to "1" all MPEG-2 NTSC SD material is assumed hybrid
AUDIO_AMPLIFY=n		n = 0-x - Increase volume of reencoded audio.  Example "1.2" = 20% increase, "2.0" = 2X
AUTO_BIAS=n		n = 0/1/2 - Default= 1, Auto Quality bias, 0=higher speed, 1=normal, 2=higher quality
B_PYRAMID=n		n = 0/1 - 1=On (default) - if set to "0", " --b-pyramid none" is used, else "strict"
BDMV_CERT_ONLY=n        n = 0/1 - 0=Off (default) - if set to "1" BD-RB ignores all but BDMV & CERTIFICATE folders 
COLOR_BOOST=n           n = 0/1 - Default=0, When set to "1" BD-RB will boost color levels by 10% (slow)
DEFAULT_LANG=s		s = language code, sets assumption for "undetermined" languages, example: DEFAULT_LANG=eng
DEINTERLACER_TYPE=n	n = 1-4 - 1=DECOMB w/o blend, 2=DECOMB w/blend, 3=SmartDeinterlace, 4=Progressive (fake)
DISABLE_SLEEP=n		n = 0/1 - 1=(Default) block system SLEEP mode during encoding, 0=No SLEEP disabling
DVD_SUB_BACKGROUND=n	n = 0-2 - 0=Transparent background (default), 1=Dark Blue background, 2=Black background
DVD_SUB_COLOR=n		n = 0/1/2 - 0=Yellow subtitles (default), 1=White subtitles, 2=Green subtitles
EXTENDED_GOP=n		n = 0/1 - 0=Off (default), 1=Use 48 frame GOPs for BD-5/9 output (rather than 24)
FIX_CLPI=n		n = 0/1 - if set to 1, BD-RB fixes CLPI file, only useful on old TSMUXER versions
FIX_MOVIEONLY=n		n = 0/1 - 1=ON (default) - If set to "0", BD-RB will not add ExtensionData() to CLPI/MPLS
FIXED_CRF=n		n = 10..50 - force CRF encoding to use this CRF value (output size control disappears)
FORCE_ENCODE=n		n = 0/1 - if set to 1, BD-RB will never check to see if original video will fit
FORCE_NOENCODE=n	n = 0/1 - if set to 1, BD-RB will always use original video (sizing will not be checked)
FREE_PROCESSOR=n	subtract n from the processor count (leaves n processors free for other tasks)
GROUP_SIZE=n		n = Number of frames in each sample group for CRF estimation
HC_PROFILE=s		s = FAST/NORMAL/BEST - Default=NORMAL, Sets quality level for DVD encoding with HCEncode
HC_ONEPASS=n		n = 0/1 - 0=Normal two pass encoding (default), 1=HC *1PASS (quick first scan) (DVD only)
HDDVD_COMPLIANT=n	n = 0/1 - if set to 1, the output will be compliant with HD-DVD standards
IMGBURN_TARGET_DEVICE=s s = Drive to use for burning with ImgBurn (ex: e:, f:, etc)
IVTC_480i=n 		n = 0/1 - Default=0, 1=Perform IVTC on all 480i sources (careful -- normally a bad idea)
IVTC_SELECTION=n	n = 0/1 - Default=0, 1=Enables IVTC on dropdown menu, use only for hard telecined sources
IVTC_TELECIDE=n		n = 0/1 - Default=1, 1=Use DECOMB's TELECIDE for Inverse telecining (IVTC).
KEEP_HD_LPCM=n		n = 0/1 - Default=1, When set to "0", BD-RB reencodes LPCM even for "Keep HD Audio"
KEEP_MBTREE=n		n = 0/1 - 0=Off (default), 1=Keep the stats.mbtree file after encode is complete
KEEP_SINGLE_AUDIO=n     n = 0/1 - 1=On (default), 1=Select audio (regardless of lang) when only 1 track exists
MAXIMIZE_REFS=n		n = 0/1 - If set to 0, BD-RB will always limit reference frames to 4. Otherwise, max.
MIN_M2TS_SIZE=n		n = minimum size required for BD-RB processing on BD-25 in MB, default is 100
MKV_INTERMEDIATE=n	n = 0/1 - 0=OFF (default) - if set to "1", .MKV files are used instead of .264
NO_MBTREE=n		n = 0/1 - if set to 1, BD-RB will disable MBTREE in encodes
PASS_TWO_STATS_UPDATE=n n = 0/1 - 0=OFF (default) - if set to "1", BD-RB uses "--pass 3" for second pass
QUICK_CRF=n		n = 10..50 -- CRF value for "Quick Extras" encoding, defaults are BD5=26,BD9=22,BD25=20
QUICK_USE_QUALITY=n	n = 0/1 - if set to 1, BD-RB will use the current quality selection for CRF encodes
REMOVE_OUTPUT=n		n = 0/1 - 0=OFF (default) - if set to "1", the OUTPUT folder is removed after burning
REMOVE_WORKING=n	n = 0/1 - 0=OFF (default) - if set to "1", the WORKFILES folder is removed after rebuild
RESET_PERMISSION = n	n = 0/1 - Default=1, When set to "1", tells ImgBurn to reset permission flag during burn
SAMPLE_SIZE=n		n = Number of frames in each sample for CRF estimation (size/group = sample percentage)
SECONDARY_CRF=n		n = 10..50 - force BD-RB to use the specified CRF value for secondary encodings
SECONDARY_USE_QUALITY=n n = 0/1 - 0=OFF (default) - if set to "0" ultrafast is used, "1" uses standard quality
SHOW_ENCODER=n		n = 0/1 - Default 0.  If set to 1, BD-RB will show the X264 window during encoding
SHUTDOWN_SLEEP=n        n = 0/1 - Default=0, Setting to "1" changes "SHUTDOWN after Rebuild" option to "SLEEP..."
THREADS=n		n represents the number of threads to use in X264, default is "auto"
TWEAK_PASS_ONE=s	s = X264 pass 1 command line tweak(s)(warning -- for experts only, bugs not supported)
TWEAK_PASS_TWO=s	s = X264 pass 2 command line tweak(s)(warning -- for experts only, bugs not supported)
USE_NAL_HRD=n		n = 0/1 - 1=ON (default) 1 = Use "--nal-hrd" in the X264 command line, 0 = Don't use it.
WEIGHTP=n		n = 0/1/2 - Value used by BD-RB in X264 command line "--weightp", default is "1"

[Paths]
NICAUDIO=		Change the path for NICAUDIO.DLL
TSMUXER=		Change the path for TSMUXER.EXE
WAVI=			Change the path for WAVI.EXE
AFTEN=			Change the path for AFTEN.EXE
DECOMB=			Change the path for DECOMB521.DLL
MKVMERGE=		Change the path for MKVMERGE.EXE
