|==================================|
| Program Name: | DVD Decrypter    |
|==================================|
| Author:       | LIGHTNING UK!    |
|==================================|
| Date:         | 07/04/2003       |
|==================================|
| Applies To:   | Version 3.1.5.0+ |
|==================================|

Supported Command Line Switches:

(You can get a basic version of this list via 'DVDDecrypter.exe /?')

/MODE <IFO | FILE | ISO>
	Used to tell the program which 'Mode' to open up in.

/SRC <Drive Letter | SCSI Address>
	Used to select the correct source drive.
	Examples: /SRC J:
		  /SRC 1:0:0

/DEST "<Folder | File Name>" 
	Used to select the destination folder or filename.
	Folder applies to IFO and File modes.
	File Name applies to ISO mode.
	Examples: "C:\DVD 1\VIDEO_TS\"
		  "C:\MY DVD.ISO"

/VTS <VTS Number>
	Used to tell the program which VTS should be selected by default.
	Applies to IFO mode only
        Required when /PGC is specified
	Example: /VTS 1

/PGC <PGC Number>
	Used to tell the program which PGC should be selected by default.
	Applies to IFO mode only
        Required when /VTS is specified
	Example: /PGC 1

/ANGLE <Angle Number>
	Used to tell the program which PGC should be selected by default.
	Applies to IFO mode only
	Example: /ANGLE 1

/DIRECT <Stream Number> <...>
	Used to tell the program which streams should be processed using the 'Direct Stream Copy' method.
	Applies to IFO and File modes.
	'*' and '?' wildcards can be used.
	Examples: /DIRECT 0x80 0xE0
		  /DIRECT 0x8? 0x?0
		  /DIRECT *

/DEMUX <Stream Number> <...>
	Used to tell the program which streams should be processed using the 'Demux' method.
	Applies to IFO and File modes.
	'*' and '?' wildcards can be used.
	Examples: /DEMUX 0x80 0xE0
		  /DEMUX 0x8? 0x?0
		  /DEMUX *

/RAW <Stream Number> <...>
	Used to tell the program which streams should be processed using the 'Raw' method.
	Applies to IFO and File modes.
	'*' and '?' wildcards can be used.
	Examples: /RAW 0x80 0xE0
		  /RAW 0x8? 0x?0
		  /RAW *

/START
	Used to start the decryption process automatically when the program has finished initialising.
	Basically, it just presses the 'Decrypt' button for you!

/CLOSE
	Used to close the program when the decryption process has finished.
	Basically, it just presses the 'Close' button for you!

/OVERWRITE <YES | NO>
	Used to force the program to either overwrite all existing files, or never overwrite them.

/SPLIT <NONE | AUTO | CELLID | VOBID | CHAPTER | FILE | LAYER>
	Used to tell the program when to split the programs output.
	Only applies to IFO and FILE modes.
	IFO mode supports the following options:
		NONE, AUTO, CELLID, VOBID, CHAPTER, LAYER.
	FILE mode supports the following options:
		NONE, AUTO, CELLID, VOBID, FILE.

/NAMING <PGC> <ANGLE> (Append PGC and/or ANGLE information to file names)
	Used to tell the program to append PGC and/or ANGLE information to the file names when saving.
	Only applies to IFO mode.

/FILES <MOVIE> <ALL> "<File Name>" "<...>"
	Used to tell the program which file to select / deselect.
	Only applies to FILE mode.
	The '*' wildcard is supported. (ie. VTS*.VOB, VTS_01*.VOB, VTS_01_1.*, *.VOB)
		Note: Only 1 can be used per file name. (ie. VTS*.* WILL NOT WORK!!)
	Putting a '-' before a file name means it will be deselected instead of selected.
	Examples: /FILES MOVIE
		  /FILES MOVIE VIDEO_TS.*
		  /FILES VTS_01*
		  /FILES VTS* -*0.VOB
		  /FILES ALL -*.BUP -*0.VOB
		  /FILES MOVIE "VIDEO_TS.IFO" "VIDEO_TS.VOB"
		  /FILES ALL "-VIDEO_TS.VOB"

THE END